Thread: Ignition Coil GA to SR and AAC plugs

Searched, didnt find clear pictures of info I desire. I am swapping my GA into SR20VE 5 Speed and EVerything has been done except that the HArness I got and put it on the VE is missing a wire plug for the ignition Coil. A guy told me that the Harness I got is SR 5 Speed. There is no plug for the GA Ignitional COil, I suppose to buy an SR model of Ignition coil?
Here some pics


AS ya can see, there is only one plug that is close to the ignition coil area. ANy help will be appreciated.
ANother issue is that I cant figure out which wire need to be rewire into plug into AAC and FIDC, I do not know which one goes on. Here a pic of it

I read some of VE swap thread about it but the Harness I got is weird, it look like to be B14 SR but still I checked Manual info, nothing can help me clearly. I appreciate any help. PM me for more pic or info. thanks

the brown plug should fit from your harness onto the ve iacv plug and the purple one needs to be spliced but im not sure what colors go to which.

Yeah though 2 plugs I am holding, I am unsure which goes to those purple and brown plugs. No details found in the manual. What about the Ignition coil? I am expecting the SR model coil, Hopefully it is what I need. will be here next Monday

The two wire plug in the bottom picture on the right is for the ignition coil, the other one Is for some sort of emmissions valve, so dont worry about that. The three wire plug in the middle picture near the distributor is for the o2 sensor. What does the ECU end of the harness look like? That will distinguish which chassis it was for. Also, it looks like you're putting the harness together from the front of the motor, it should wrap around the back under the intake manfiold.

PS, the coil you have won't work the stock SR harness, get a B13 or P10 (91-94 for the B13, and 91-93 for the P10) coil.

I am little confused about what ya said, COil I got is from my GA b13. Even so I still need to plug those AAC and FIDC, Might need different harness.
The end of the harness look same as my old GA harness was. except GA was auto and this HArness I got is SR 5 speed. Year unknown. I could need a help from someone who knows around this area.

I managed to yank a half harness for AAC and FIDC,from G20, though missing a plug for B14 tranny sensor where it is at the tranny fluid cap. Look like I have to splice and add a wire there. could use help on that, also need add a wire plug to plug into alternator harness in the body harness. help?
almost done with wiring the engine.

Edit:
Though I got an idea, FiDC plug is the little black plug? or the big gray plug?