Welcome to the SR20 Community Forum - The Dash.
SR20 forum logo

Thread: Low port motor 94 G20

+ Reply To Thread
Posts: 1-5 of 5
2012-11-13 23:44:49
Low port motor 94 G20
What a huge pain to get the intake manifold off. I can't see anything mission critical as to why it has coolant running though it. anyone block off the water feed to the intake manifold?
2012-11-13 23:48:53
Seems like in cold temps,the intake manifold needs the coolant running through it to keep the throttle body from freezing.Maybe I just dreamed this,but it's running loose in my head,so I said it.I'm sure there is a thread somewhere on this subject if you search.Or,again,loose thoughts in my head.
2012-11-14 00:11:08
Ok figured as much. Won't need it for Socal weather.
2012-11-14 03:10:04
On the lowport motor it goes through the manifold out to the pipe that goes to the thermostat housing/radiator. If you block it off, you wouldnt have any coolant flowing through the engine...
2012-11-14 03:36:05
I saw 2 small lines. One from the throttle body and another running down the intake manifold on the passenger side feeding lower to upper manifold.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)

    Back to top