Thread: Need B15/Spec V axle outer cv/huh spline count and size!!

Spline is 27.

Sent from my SPH-L710 using Tapatalk 2

Alright, the new hubs are in the works with DSS. Josh (unijabnx2000) is going to be dropping off a set of hubs and spec v axles to DSS hopefully Friday so they can see if modifying the stock hubs is possible (if they have the proper size tooling to press the larger splines) or if they will just design and make a new set of hubs with the proper splines.

Pricing is looking to be around 100.00 if the hubs are able to be resplined or 350.00 for a new set of hubs with the correct splines. Either or, its looking good so far and will be a great option for us.

This is awesome as I will be needing a set soon.

Might have to delay my trip down there... The hubs are not budging. and without taking the whole knuckle off the car and to a press, i dont have time to do that today. I can do it tomorrow, but then I wont make it to Salisbury in time.

Alright people. Looks like the hubs are able to be drilled and resplined for the b15 axles without a problem. Cost should be around 100 bucks for a pair of hubs that you send in to have done.

If you need them done, contact Frank at DSS. He has all the information you need.

That's awesome. Makes that swap a lot easier. Good work!

I gotta mail my other hub to them, since I forgot one at home and remembered it was still in the house after I got an hour into the drive there.

Man Ashton I'm glad you made things much easier for us all wanting to go 6 speed!! The rims,knuckles,brakes is one thing holding me up from doing the swap.. I'm sure everyone wanting to do the swap would rather do the hub rather than everything else. Thanks Ashton!