Thread: Replacement procedure

Is there a detailed "how to" with pictures/etc. on how to go about pulling/replacing the It Idle air adjusting unit situated on the passenger side of the intake unit on my 91 SER? I did search....

Probably not. Its fairly straight forward though.

Unplug the negative battery terminal.

Unplug the two connectors going to the unit

Remove the 4 bolts holding it on (very little room to work with especially on the one on the bottom backside

Then you can remove the unit and either clean or replace then work backwards through the steps

Thank you...does anybody sell these units as re-manufactured?