Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: e60 values?

+ Reply To Thread
Posts: 1-6 of 6
2012-10-26 22:41:12
#1
e60 values?
Anyone know the resistance values on a good e60 Maf? I think the one I purchased is bad..

Thralls
2012-10-26 22:48:08
#2
I don't know the value, but if you can find them for the N60 they are the same.
2012-10-27 01:36:59
#3
http://www.sr20-forum.com/tuning/17897-how-well-your-maf-performing-2.html#post239252
2012-10-27 01:50:44
#4
Should't really test them with idle tests as the values stated are from larger engines. Obv a larger engine at the same RPM as a smaller engine will flow more air through the maf.

I always test my mafs as a no air flow test (n62) but im not sure the no flow voltage are with the n/e60
2012-10-27 03:08:04
#5
Originally Posted by pTen
Should't really test them with idle tests as the values stated are from larger engines. Obv a larger engine at the same RPM as a smaller engine will flow more air through the maf.

I always test my mafs as a no air flow test (n62) but im not sure the no flow voltage are with the n/e60


That is true, but I still have seen values within the usability range on our motors. Generally most E60's I've had have been at 1.10v at idle. Now if it falls below 1v then ECU might enter into limp mode.
2012-10-27 03:13:43
#6
Car idles fine. Won't rev past 3k say idle or under load. Haven't done a voltage check since I don't know much about theses mafs.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top