Thread: The Quest for the Non-Raspy Resonator

I'll try and get some tomorrow.

Sweet.

Alright I measured the Resonator + Cat, the total length is about 40 inches.

So I can either find a 40 In long Resonator (which seems hard to do)

Or leave my current gutted cat, or try to find a 97 CAT.

Thank you Swiss for this information, it can be found here
If I leave my current one, it is approx 13 3/4" long, requiring me about 27"-28" Resonator
If I get a 97 CAT, is is approx 12 5/16" long, Requiring me a 28"-29" long resonator

So basically the Resonator that classicaddict posted



Or this one just shortened:

Get the longest one that you can squeeze in there

If i get say a 33" one then, just weld on another 7" onto it, I think that might work out best.

This way I wont have to worry about a cat altogether

Sweet, I think I found one for Turbo guys!

Look at this

So I've been thinking more and more about the 6" Resonator.

I wish Magnaflow had 5" ones that were long enough!

I'm afraid the resonator will be lower then this, if so then I'll have issues with speed bumps hehe.

Take the heatsheild off the underside of the car. It will give you more clearance to raise the piping more.

Yeah, I think I would be able to raise it but only so much, because I don't want to put the flex pipe under stress hehe

Watch out with a 6" Magnaflow resonator, I bought one for my LOUD Spec V, no more bees but I'm lowered, every single speed bump mess with my 12640 resonator, I guess a 4" round would be enough.

Well my car is stock hight, but I might lower the front 1" or something in the future...

I wish they made the 5" long enough!!!