Thread: Braided fuel lines / AN fittings on OEM hardlines

Can someone please explain how to fit braided fuel lines and or AN fittings to the OEM hardlines that run from the fuel tank?

You use a hose and then a barbed straight to AN at the fuel rail if using an aftermarket rail.

You can put the braided hose onto the hardline just like a normal hose and clamp it down with no issues.

Using the stock VE rail. So looking for a solution to get onto the rail.



This can work for the hardlines as they're kinda out of sight yes. thanks

I just took out my hard lines this past wknd. I'm going to run Earl's Pro-Lite -6 feed & return lines. I'm modifying the sending unit with AN fittings.

http://www.sr20-forum.com/848386-post175.html

Careful with the type of braided hoses you guys use, if you are not careful in your selection you will purchase lines that will not be able to handle gasoline for extended periods of time and will begin to leak/expel gas vapor.