Thread: 95 G20 to 98 sentra

i currently have a 95 g20 5 speed non touring i had recently decided to remove the rust from the car and paint it but while doing so i have found out the car has more rust than alil bit so my plan is to buy a sentra shell and swap over the motor and trans and anything else i can transfer to the sentra but my question is are there any difficulties that i will face or will be it be a simple swap

just did some searching and found the GA dash harness doesnt match directly wit SR harness anyone know anything bout this

Will be gathering some wire diagrams and comparing also looking for front bumpers and suspension

had a shell lined up but it fell thru anyone know someone wit a decent b14 sentra shell

If the sentra is a GA you will have to follow the GA to SR swap. the motor mounts are different from the P to B chassis.

I thought only the tranny mount was different

Would it be easier to switch the interior harness also to the sentra

do some searching. find the GA to SR swap guide.

If the 98 is an SE I don't see an issue with mounts(or the harness), although the harness and some sensors are different between the two. Use the SE harness and sensors off that motor(if the shell you get has a blown motor).

Its not a SE it has the GA in it