Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Harness Plug Need ID Help

+ Reply To Thread
Posts: 1-5 of 5
2012-06-24 21:10:52
#1
Harness Plug Need ID Help
Info - B13 Harness with GTI-R motor.

Re-swap the motor again and have been some time since I have done it so I kinda got a head of myself so I need some help. Yes, I know I skip the labeling process was in such a hurry. Please identify these plugs and where they go in the car, this will help me greatly.

Labeled for convenience and thank you.

2012-06-24 22:16:34
#2
d looks like alternator or fan

A looks like knock sensor

B looks like starter sol??
2012-06-24 22:17:03
#3
where are these plugs located
2012-06-25 01:24:15
#4
Those plugs are from the harness that goes to the ecu
2012-06-25 01:25:46
#5
This looks like the driver side of the bay. I'm pretty sure I see an ignitor chip, a fuel line, and a speedo cable. In that case "D" should go to the ignition coil. "A", and "C" I'm not positive, but they look like the plugs for the little vacuum solenoids that go up to the EGR, and charcoal canister. These solenoids should be down below the intake mani close to the tranny. "B" looks like the plug that goes to the end of the injector harness. There is a little plug just like that up there that goes to the knock sensor.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top