Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Flywheel Question

+ Reply To Thread
Posts: 1-10 of 14
2012-04-27 18:14:23
#1
Flywheel Question
Is the flywheel the same in the lowport and high port SR20 engines, in terms of size and bolt patterns?

I have a Roller Roller SR20 in a B13 Sunny and I'm thinking about getting a light weight flywheel.
2012-04-27 18:22:45
#2
i think the teeth count on the flywheel co-insides with what cas/ditributor/ecu you use.
2012-04-27 18:24:38
#3
they are the same
2012-04-27 18:26:00
#4
obd1 and obd2 have different tooth count but bolt pattern and size is the same
2012-04-27 18:26:49
#5
They all bolt up and physically work, but if you have a crank angle sensor in the transmission bellhousing you will want to make sure to get the right tooth count to avoid a Check Engine Light.

http://www.sr20-forum.com/information-library/8164-sr-flywheels.html
2012-04-27 18:51:01
#6
Originally Posted by BenFenner
They all bolt up and physically work, but if you have a crank angle sensor in the transmission bellhousing you will want to make sure to get the right tooth count to avoid a Check Engine Light.

http://www.sr20-forum.com/information-library/8164-sr-flywheels.html


I have a 5spd gearbox
2012-04-27 18:54:01
#7
Don't we all.
2012-04-27 19:23:10
#8
Hes referring to obd1 and obd2 cars. Correct me if Im wrong but obd1 is 109 teeth and obd2 is 108 teeth, right Ben?
2012-04-27 19:39:07
#9
It's all in Vadim's thread that I linked to.
2012-04-27 20:04:59
#10
thanks guys
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top