Welcome to the SR20 Community Forum - The Dash.
SR20 forum logo

Thread: se-r gauge cluster in a 4-door??

+ Reply To Thread
Posts: 1-7 of 7
2008-04-13 16:11:51
se-r gauge cluster in a 4-door??
ok so i have my sr20 swapped into my 4-door

when i stick in the se-r cluster it does nothing
what pins to i have to switch around or whatever to get this thing to work right

i need a tach lol
2008-04-13 16:16:44
what part isnt working? the RPM tach or the MPH ones or both
2008-04-13 23:58:29
if i put in the se-r cluster nothign works (i don't have the speedo cable hooked up)
the tach, fuel, heat, warning lights and even the actual lights to see it at night
the only thing that works is the clock but it only works if i turn on the litghts
2008-04-14 09:34:47
2008-04-14 11:14:08
You need to get a FSM to get through all of the issues you will have when swapping. I think in your other post you said you have a complete SER. I suggest swapping the engine, dash, and engine bay harnesses to solve all of these issues. The only wiring you will have to do then will be with the chassis side. ie: power windows, locks, door pins, and so on. This would be a lot easier than figuring out all of the motor issues.
2008-04-14 16:34:11
well the motor is done and runs, now i guess i just need to get a fsm to to the cluster, i was just hoping someone had already written it down with good instructions

maybe i will do that
2008-04-14 17:03:58
swap over the complete harness from under the dash from a se-r to the 4 door.

you will save your self many headaches .
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)

    Back to top