Welcome to the SR20 Community Forum - The Dash.
SR20 forum logo

Thread: 5th gear swap or flip how hard

+ Reply To Thread
Posts: 1-8 of 8
2012-03-22 02:06:18
5th gear swap or flip how hard
Got a tranny with fifth gone and one with a good fifth. How hard is it to swapem? What tools do I need?
2012-03-22 02:22:12
Not hard at all. Regular tools plus some snap ring pliers (or improvised). Have you seen the How To?
2012-03-22 13:36:26
Can you post link?
2012-03-22 14:20:35
2012-03-22 15:17:17
A hydraulic press and bearing separator were put to good use removing the old fifth gear synco hub and installing the new one when I did the job.
2012-03-22 18:49:16
its pretty simple... I did it to a transmission in my room in about 2 hours, taking my time. Should be simple!
2012-03-24 15:46:46
Yeah it was pretty simple. Wound up getting it done in about an hour with Josh. Not nearly as bad as I thought it would be. Thanks, Ben.
2012-03-24 15:53:01
Woop woop. These are some simple manual transmissions.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)

    Back to top