Originally Posted by
ashtonsser Yeah ill take some pics after I get them in. Should be pretty easy to adapt them to the se-r rails as well.
That is what has always concerned me about switching seats.
Will pretty much any other seat have to be adapted/modified in order to bolt in? Are some seats easier than others to adapt? Do you need a metal fabrication shop (plus skills) to get them installed properly?
Originally Posted by
blurr.rt.by.you 350z cloth manual seats. i remember seeing someone on this forum do it and it looked great
I remember that as well. Dark grey cloth, looked superb, but I cannot remember who it was that did it.
I do remember that the guy who put in the 350z seat said that he had to be super careful and precise on his rail modifications in order to make them install at the right height (lower) in his B13. He said the job was not for a newbie at metal fabrication. It is too easy to get the seat at the wrong angle or off balance.
EDIT:
http://www.sr20-forum.com/members-rides/40652-interior-thread.html
There you go. SER Kyle did them. First post in the thread. Discusses it further in subsequent posts.
DOUBLE EDIT:
Here is "THE" Seat Thread...
http://www.sr20-forum.com/general-sr20/40617-seat-thread.html
Found that link in the other link above. From that link, DBPhillips did the 350z seats as well.
Direct link to DBPhillips post:
http://www.sr20-forum.com/general-sr20/40617-seat-thread-2.html#post528520
That right there looks absolutely excellent. It is also still a Nissan seat which I like as well. OEM Plus for the win.