Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: How do I get my CO lower????UPDATED, AFTER TIMING/FUEL and PLUGS DONE!!!!

+ Reply To Thread
Posts: 31-40 of 47
2012-03-14 02:50:53
#31
Originally Posted by lynchfourtwenty
well what i meant bro was that they could help you, maybe someone could lend you a wideband or maybe let you toss the car on the dyno for a little testing..

i had to lean my shit out a tad to maintain a 14.7-15.6 afr on both of my ve cars and passed both times.


good call, i was thinking of getting a wideband anyway, since i plan on spraying..maybe i should get one...
2012-03-14 02:59:52
#32
word son.. you can even induce a slight lean condition if you can make the right size vac leak.
2012-03-14 03:03:31
#33
Originally Posted by lynchfourtwenty
word son.. you can even induce a slight lean condition if you can make the right size vac leak.


interesting.....hmm
2012-03-14 12:55:46
#34
Originally Posted by bgreen
big bad ve guys, usually have big bad ways around emissions, i can probably just have marsh give me a lean tune to pass emissions, but thats just time consuming and all this bs...i have no wideband so atm i dont know what its reading


Be careful if you tune too lean, if you go too lean the NOX will be too high.
2012-03-14 19:21:20
#35
LOL update.....

So today, i was setting my timing back cause the shit was driving like a dog, so i went to look at the o2 sensor, and i was like...WTF...why is my shit not connected...go to look and notice..that thanks to mr morgan i have a wideband sensor plugged into my header not an o2...and therefore i think i found the culprit behind the CO
2012-03-14 19:26:30
#36
saved you a step already on actually watching what your motor is doing instead of blowing it up...

02 feedback is most likely off on the calum
2012-03-14 19:29:00
#37
Originally Posted by morgans432
saved you a step already on actually watching what your motor is doing instead of blowing it up...

02 feedback is most likely off on the calum


LOL....i was actually going to be a wideband too...i wonder if i can find the gauge and the connector
2012-03-14 19:30:13
#38
ebay has it but im not sure i would trust that sensor
2012-03-14 19:30:50
#39
Originally Posted by morgans432
ebay has it but im not sure i would trust that sensor


this guy...lol
2012-03-14 19:47:24
#40
Is that the AEM?
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top