Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: ga16 auto to sr20 wiring ??? asap

+ Reply To Thread
Posts: 11-17 of 17
2008-04-11 17:08:49
#11
You need a wiring diagram to find out what they are first. There will be lots of other issues too, you need to just sit down and fiddle your way through it.
2008-04-11 18:11:15
#12
i see the xe is a 92, what year engine harness did you get? there will be some plugs that are not used. as someone else stated, you will need to find a FSM and trace what the left over wires do. i had to do it with my swap, and i knew nothing about wiring. i wish i could be of more assistance, but my swap was using the 91 harness in a 95 car.
2008-04-11 18:19:22
#13
i did exactly what i showed you and mine cranked right up. Also mine is a different car too. But i figured it should all be basically the same thing.
2008-04-11 19:11:31
#14
i used a 91 se-r harness i have a complete 91 se-r that i'm taking parts from

right now the starter will do nothing with the key
and the se-r gauge cluster does nothing
2008-04-11 20:33:22
#15
i may be wrong, but i'm pretty sure the plugs on the driver's side in the pic are from the starter harness right? they should plug into a junction on the driver's side frame rail. i was looking at my starter harness and it hit me.
2008-04-11 21:01:27
#16
the top 1 in the 1st pic i think the the Dropping Resistor (A/T only), the 2 in your hand, im sure 1 is neutral safety, reverse lights.
2008-04-12 05:37:07
#17
ok i got it up and running, never could figure out anything to get the key to turn the starter, so i just wired it straight up
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top