Thread: Swap issues. b13 1.6-2.0

what he said^^^^ the pins can be changed i guess if you know what you are doing, The diffrence in the plugs if i remember correctly is one of the pins is blank on the PLUG part and on the male end there is a pin that goes in that empty slot. so it wont power anything...

I know I said it earlier you have to splice/repin a few wires on the inside of the car. Also when I did mine after the interior harness was fixed it had the exact same symptoms and it was the underhood wires needed to be repinned. So 2 items need to change the interior and the underhood. At least in my case the 2 things fixed it and mine did the exact same thing described by the OP.

one of them is a 4 plug and the other is a 6 plug on the different harnesses.

right right^. I remeber it like it was yesterday.. Everything electrical was working but it wouldnt fire for anything.. i looked at that stupid long plug behind the center consoleand saw that it wasnt really plugged in and when i looked at it i saw that the pins were in fact diffrent. and what helped me was that i had both 93 and 94 harnesses next to each other and even tho the plug was the same it had a diffrent pin out...

...so if I have a 94 harness...I dont need to pin? or do I?...im so confused...

if u do then you dont...

So i need a 94. Ok thanks!

...question the status quo...

Good luck man.... It took me like 3 months searching the forum and junk yards to find a 94 ser harness lol....and to nissan boi. Even tho you had similar issues happen the b14 harness is like super diffrent compared to the older SeRs hence why morgan said it was a whole diffrent car.

first connector going to main harness (dashboard harness) called F17
there are 16wires from 1.6
Pin # Name
104 Fuel Pump Relay black yellow
2 Tachometer blue black
7 Data Consult yellow black
9 Radiator Fan Relay 1 (low) blue
11 A/C Relay yellow blue
14 Data Consult yellow
15 Data Consult yellow red
23 Data Consult white red
24 Check Engine Light orange black
32 Speedometer yellow green
33 Fuse D red
34 Fuse N violet
35 Neutral Position Switch green orange
41 Dua Pres SW brown yellow
45 Fan Switch lightgreen red
from AAC AAC white green

second connector going to main harness (dashboard harness) called F14
for 1.6
Black Red - Ignition Switch
White - Fuse link (Power)
Yellow Black - FICD
Black Red - Air Regulator
Blue Black - ???? (i dont have any idea)

please somebody correct me if im wrong. and please also can somebody post its counter part (for 2.0)

Thanks.

Just a question for OP, why didn't you go for the VE? Uses the B13 tranny of course