Thread: High port TB heater lines????? Some Help

I'm looking all over the forum and even in the fsm and i find nothing ..... where are the coolant lines that are supposed to be connected to the TB heater passage?? The only hoses i see are under the intake manifold on the water neck and go to the AAC valve am i blind?? idk some one guide me please

jdm sr20de

(Green arrows) i know where they go

(RED DEMON ARROWS)

Do yourself a fav and dont run them. It'll make everything easier on you. They arent needed anyway

will do.. but where does the coolant get fed from? i don't see any other spouts on the water neck pipe on the rear of the head unless i'm blind and its right in front of me.. i don't like puddles of coolant on the first start lol

the hoses come off the hardline that runs on the back ofthe block

where are they so i can cap em? im bugging that i cant find them

these are the only two i see and i know where they go

Yeah highports arent like lowports where the coolant flows through the intake manifold. Coolant for the tb comes from the coolant hardlines. Dont cap them though unless you want problems down the road. Loop them.

Where are you thinking those go? Unless you have a DET they shouldnt be going anywhere. Just two lines going to the heater core IIRC

Also, those small large diameter coolant lines behind the head...if i were you id put new ones on there also while you can get to them easily.

its a regular DE those two lines with the green arrows on the second pic go to the aac valve on the intake plenum in the first pic.. i just wanna know where tb heater is supposed to get fed from i don't see any other spouts on the hardline..

ima feel like an idiot if their hidden and i cant see them