Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Advice on axles please

+ Reply To Thread
Posts: 11-20 of 22
2012-02-20 13:58:26
#11
I bought a set of new axles from RockAuto a couple of years ago. (Cardone). No problems so far, including 3 track days with a VE engine. they don't have the damper rubber, but with Prothane mounts, who can tell?
2012-02-20 14:48:22
#12
When the time comes for axles, I shall go with the chinese ones from GregV. He quoted me a PS axle for my egg and it was $200.
2012-02-20 14:56:10
#13
Originally Posted by Old
I bought a set of new axles from RockAuto a couple of years ago. (Cardone). No problems so far, including 3 track days with a VE engine. they don't have the damper rubber, but with Prothane mounts, who can tell?



Were these for a LSD transmission?
2012-02-21 01:51:44
#14
Originally Posted by BenFenner
To contact Greg, call him or post in his vendor section.
Phone: Contacting Us
Vendor section: G Spec Performance - SR20 Community Forum - The Dash


Thanks. I came across a used OEM unit on ebay... gonna try this first. If it doesnt work out then Ill give Greg a call


Originally Posted by Old
I bought a set of new axles from RockAuto a couple of years ago. (Cardone). No problems so far, including 3 track days with a VE engine. they don't have the damper rubber, but with Prothane mounts, who can tell?


Ill keep these in mind as well. I think the biggest thing is the quality of the support bearing they use.

Thanks
2012-02-21 18:13:06
#15
Originally Posted by Boostlee
Were these for a LSD transmission?


Yes. I think that I still have the boxes since I put my OEM's in them for keeping. I can get the part nos. if you want.
2012-02-21 18:15:29
#16
^^^ Please, do!! I would greatly appreciate it!!
2012-02-22 03:03:16
#17
Originally Posted by Old
Yes. I think that I still have the boxes since I put my OEM's in them for keeping. I can get the part nos. if you want.


if my deal falls through would you be willing to sell me the oems?
2012-02-22 20:45:14
#18
I offer a set of aftermarket axles for about 200 per set (or 100 dollars per side)

I have used these exclusively for close to 5 years in my street driven B13 without issues.

The SCC B13 has one of my axles in it on the drivers side.

Gus (Ciclon1) has a set of my axles that he will be using for one of his many projects...

I offer a 1 year/12,000 mile warranty on the axles. Unfortunately if they are shattered I cannot do much as my vendor will not warranty them.
2012-02-24 16:59:49
#19
I just replaced my driver axles on my 93 se-r. I got mine from OReilly's. ~~knocking on wood~~ I haven't had major problems w/ axles from them. I've been using their axles since the late 90s. When I had my 93 integra, they would break or the boots would rip and I'd just go replace it since they're "lifetime" warrantied. Recently, I was reading that AutoZone and typical reman ones suck, so I went w/ the new ones. Fit like a glove on the driver side. If you don't mind spending the time swapping them out and changing the tranny fluid, then I think OReilly is fine. Unless you have extra cash that you dunno what to do w/, personally, I wouldn't fork out $600 for some axles unless they were made out of titanium w/ polyurethane boots...=p
2012-02-24 23:44:19
#20
Are raxles no longer made or something???? that is the only axle i have ever ran and have never had an issue. they are nicely priced too. at only about 150 a side.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top