Thread: Replacing Distributor Oil Seal

Ok So I took off the distributor off today to get at the seal on the back of the dizzy. Now my question is how do you get to the seal? There is cap before the seal and the rotating piece that goes into the camshaft.

I read some threads on the old forum , but nobody mentioned how they actually got the seal out. ANy Info would be appreciated.

I just replaced this last week. I used a knife to carefully cut the rubber and it pretty much fell right off

yup, I used a pick

its an o-ring. you could probably get it off by hand. dont worry

it stretches.
make sure when u put the new one on that its str8. run a pick around it so its not twisted.

Cool Cool. I didn't want to try that before I confirmed it wouldn't F the new Seal.

my seal was so bad it just crumbled lol, i used a knife and it just fell apart, i wouldnt worry about being too careful wih the old seal, just be careful with the new one