Welcome to the SR20 Community Forum - The Dash.
SR20 forum logo

Thread: Help ID connecting rods.

+ Reply To Thread
Posts: 11-12 of 12
2008-04-07 03:48:46
well the build i used those rods on were the honda build, it was a honda but same concept, i was running a b16 block stroked to 2.0 with 7:8:1 compression they were coated, but i had low compresion for the large gt35r turbo and HIGH psi.

if you go with 8:5:1 on your sr20det you will be more than fine.

with my current sr20det build i have the wiseco pistons and 8:8:1 compression which i think is a very nice compression ratio to go along with the gt2871r i have (also running the .86ar) definitly helps with spool.

i would definitly build the block with a outlook of the highest ammount of psi/whp you could possibly want, also with the largest turbo th block might see, that will give you a good range to start out with... like have range for running the gt28rs to the sc61
2008-04-07 03:51:55
Originally Posted by GT2871RBLUBIRD
like have range for running the gt28rs to the sc61

hehehe, I have one of each!! Rob, we will talk soon!!
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)

    Back to top