Thread: MFactory 4.785 final *installation help*

I'm talking about this:
http://www.sr20-forum.com/mazworx/25501-mfactory-4-785-final-drive-gears.html


Hi Guys i want to know if it's very complicated to install this in my SE-R transmission?

I think i'm gonna ask my mechanics to do it for me, but i'm curious to know how much time it takes to do the install?

How much money do you think this will cost me?


Thanks guys

It's easy. Time consuming but not to hard. The only pain is lining up all the arms so the main shaft slides in the case. There's a nice write up on taking apart your tranny in the HOW TO's. GL.

Thanks, man.

Anybody else know how much times it can take?

The time consuming part is taking the trans out of the car . Then it takes 2-3 hours taking it apart to repace the f/d start to finish .

Heres a thread i made on taking the trans apart this should give you a idea......

http://www.sr20-forum.com/general-maintenance/40644-transmission-case-5th-gear-fix.html

Keith I will be dropping a trans off with you to do this.