Thread: Where is the EGR temp sensor plug on a B13?

I can't figure this one out...plenty of talk with the search button, but no pics or diagrams. Maybe someone can give me a landmark of where it is in relation to this:

As far as i know highports didnt have them 91-93 until they switch to a low port and then became standard on 95+ ob2 . Atleast my 91 didnt have it but california emmisions might so dont hold me to it . All you should have is a valve and vac solenoid .

That would explain it perfectly.
I looked at your sig...your from philly, and you built a B13 autocross car...how have I never run into you at Philly, Susquehanna region(s) autocrosses? I've been running with them for 15 years, 10 of them in my old B14...

California emissions b13's had them on their highports. If your car doesnt have an egr temp sensor which would be right off the egr valve itself, your harness will still have the plug for it taped up to the stock harness in that location. It is a grey 2 wire oval plug the same style connector as the coil plug. It should be taped to the harness loom somewhere near the throttle body side of the intake manifold where all the egr control valves and solenoid is.

Ive only lived down here for three years now but ive been to the autox and eagles stadium last year . Ill be back into it more next summer its been a busy summer with my wedding and motor building . My freinds say they do alot of event up near allentown ? i have to see what events are in my area for this comming season .

Well congrats on the wedding!
There are a couple of us that auto-x with the susquehanna region that are sr20 heads...sometimes we go to Citizen's Bank Park if we are motivated. I sold my auto-x B14 to someone up north but now I run a spec-v in GS. One guy has a really nice '91 NA and the other has a '93 Nasa track day car.