Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Rear Trans Mount Bolts b13

+ Reply To Thread
Posts: 1-10 of 13
2011-12-19 12:52:59
#1
Rear Trans Mount Bolts b13
I'm pretty sure the bolt size and pitch is the same across all the transmissions, but I need to know the size and pitch for the rear mount bolts. Mine all snapped off inside of the trans, so I'm going to need to try and get the strongest ones I can.

Paxton.
2011-12-19 18:38:53
#2
well I think it's m12-1.75 or something? I think I might be thinking about the transmission bolt idk
2011-12-19 18:47:08
#3
yeah, I'd check em when I pull it but that's going to be a bit hard considering I'd have to drill em out :/. I'll search courtesy and see if they don't have something. I can salvage the gear stack but the case is toast.
2011-12-20 13:58:44
#4
contacted greg v about the bolts, but does anyone know? I mean all else fails, I'll take my tap kit and check the threads on the new trans myself I just would rather have everything so I don't take up a bay in my shop for more than a couple hrs.
2011-12-20 17:29:38
#5
I am confused, are you talking the three bolts that go through the mount into the bellhousing. I have a set, but I really don't have time to mess with it until the weekend. Are you in a big push to get the car going?

Brent
2011-12-20 22:56:12
#6
Just curious, what mounts do you have? They must of been loose or had some serious force to come down and snap them. Good luck man!
2011-12-20 23:42:38
#7
Originally Posted by coach
I am confused, are you talking the three bolts that go through the mount into the bellhousing. I have a set, but I really don't have time to mess with it until the weekend. Are you in a big push to get the car going?

Brent



Well Brent, I'm in need of the trans first . Were you ever able to check and see if you had one? If not I'll source to another forum member on here. That should clear up the "big push" =p Yes though, the rear motor mount.

Originally Posted by nismo94tuner
Just curious, what mounts do you have? They must of been loose or had some serious force to come down and snap them. Good luck man!


Shitty ohio/ky/in roads..solid front dogbone and tein ss coilovers? I'm not to sure what the cause was, I just know they snapped. Just the two that are close to eachother not the one on the top. As far as the mounts go, they are energy ones.
2011-12-20 23:45:37
#8
I also should have all the bolts ya need to replace the snapped ones if you're wanting OEM replacements. If not, I can still check the diameter and pitch on them later tonight or tomorrow.
2011-12-20 23:48:02
#9
Just referred to my post about inquiring on the bolts to purchase from Greg. When I first bought the car I only pulled 2 out of that mount...

this is my expression for lack of words on how stupid I feel right now haha

http://gspec.com/bh/b13-112.jpg
2011-12-20 23:49:48
#10
Originally Posted by irishman_punk
I also should have all the bolts ya need to replace the snapped ones if you're wanting OEM replacements. If not, I can still check the diameter and pitch on them later tonight or tomorrow.


Thanks man, Since I might be sittin on this for a couple weeks I'm just gonna grab em from Greg. Thanks for the insight/offer though
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top