Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Thinking Bout Moving My Heat/AC Control Unit

+ Reply To Thread
Posts: 1-10 of 11
2011-12-10 02:56:18
#1
Thinking Bout Moving My Heat/AC Control Unit
lately i have been thinking of moving the heat/ac control unit where the radio is . putting the radio lower or removing the cubbie tray and putting in a double din .

anyone try moving the unit to the top ?
2011-12-10 02:59:49
#2
Dude alot of people do that, its a bit of a pain but i think its worth it.
2011-12-10 03:00:23
#3
i replaced mine last weekend....if you could get the spacing of the mounting holes to work out the cables should be long enough.....not sure if the wiring is long enough tho....might be.....i wanna see how this works out....good luck sir!
2011-12-10 03:01:08
#4
i thought most moved it down or did radio delete?
2011-12-10 03:04:51
#5
i moved the radio lower and removed that little storage tray but i want a double din radio and tryna see if its possible to move that heat/ac unit on top
2011-12-10 03:18:09
#6
Ive seen a few people who have moved the heater controls up, you just have to lengthen some stuff out. Some move the stero down to put gauges where the stereo is at 90% of the time.
2011-12-10 03:21:06
#7
tru tru i jus want a double din radio that y im asking bout it
2011-12-10 20:38:53
#8
i started to remove the center console to try moving the heat/ac unit
2011-12-10 22:10:17
#9
I would love to see if this works. I would like the hvac up there and the gauges in the top din slot. Now that I think about it would be nice to move it to the lower din slot too. So it would be radio in the top spot gauges in the first din, then cupholder and the hvac at the bottom.
2011-12-11 01:54:20
#10
Originally Posted by blackb13se-r
I would love to see if this works. I would like the hvac up there and the gauges in the top din slot. Now that I think about it would be nice to move it to the lower din slot too. So it would be radio in the top spot gauges in the first din, then cupholder and the hvac at the bottom.


but ima try to move the hvac on the top .
than it would be the radio gauges cup holder
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top