Thread: Anyone have a spare B15 radiator?

I am looking for someone to take a measurement of the distance between the bottom and top mounting posts. Thinking the QR aftermarket radiator would be a much better fit for the P11 than the B13/B14. Rather than fabbing up new mounts would just need a longer upper hose.

Most b15 guys go with QR koyo's for aftermarket, so the p11 should be the same.

Thats what I'm thinking, just need the measurements to double check. Hell even the top measurements would be fine.

Would this help?
2001 Nissan Sentra Radiator 2.0ltr

hobbs purchase a mishimoto or a koyo.

stratton.

mirrortints, thanks for the help! Found specs online for B14 and B15 radiators, bottom pegs are the same 370cm apart and on the B15 the top ones are 668cm apart which looks to be about right for the P11. After work I'll be measuring. Sure is alot less work than trying to fit a B14 rad.

It's really not all of that hard to fit a b13/b14 koyo! Actually if you have a top mount the lower radiator will help with turbo fitment. Also I got my B13 Koyo for $310 shipped, only $60 more expensive then knock off mishimoto.

http://www.sr20-forum.com/forced-induction-turbo/48514-how-install-koyo-r1977-radiator-p11.html

I actually have a B13/14 in the mail thats showing up tomorrow, really a good bit of work after bending, cutting, drilling, and losing my hood prop holders when I can just buy a longer radiator hose or have it rewelded. The QR B15 rad is also larger than the B13/B14 radiators so I can fit two 14" fans.

Nice, I do wish the Koyo was longer! I ordered two 14" fans by mistake and one of them is hanging out by about 2-3". Still they cool like no other with boost.