Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Remote battery mount

+ Reply To Thread
Posts: 11-16 of 16
2011-09-10 22:26:35
#11
have you thought about a frame rail mounted pc680 ?
2011-09-11 01:35:54
#12
I thought about a frame rail pc680, but my frame rail is already occupied.
2011-09-11 15:19:51
#13
only thing that sucks is at the track(depending on your regulations) you have to have a kill switch installed in the rear and for it to be accesible in case of emergency
2011-09-11 15:48:29
#14
I have/had two amps (one up front, one in back) and a capacitor hooked up to distribution blocks in the rear. Worked great. For a short time I also had a third amp powering a pair of 10" subs. Again, no issues and the rear battery made all the wiring easier.
2011-09-11 20:18:30
#15
I know this setup isn't perfect, but here's what I have done.





2011-09-11 21:54:39
#16
Originally Posted by BenFenner
I have/had two amps (one up front, one in back) and a capacitor hooked up to distribution blocks in the rear. Worked great. For a short time I also had a third amp powering a pair of 10" subs. Again, no issues and the rear battery made all the wiring easier.


+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top