Cruise control not working
My car is a 98 sentra se, It came with no cruise vacuum pump and actuator diaphragm thing, I put them in, and now when I push the main switch and either accel or coast at the same time the cruise light in the dash blinks, I went through the fsm diagnostic and certain pins dont seem to be in the right place, the one pin for the clutch switch testing is not where it is supposed to be,
everything I have tested so far seems good I dont know what else it could be, the wiring seems to be ok as do all of the components, I have 3 cars I've switched the different components from and I dont understand whats wrong, I haven't switched the main ecu yet as they are different between the 3 cars
When im driving above 30mph like the fsm states, I turn the main switch on but when I push the accel or coast button nothing happens, what could it be?
everything I have tested so far seems good I dont know what else it could be, the wiring seems to be ok as do all of the components, I have 3 cars I've switched the different components from and I dont understand whats wrong, I haven't switched the main ecu yet as they are different between the 3 cars
When im driving above 30mph like the fsm states, I turn the main switch on but when I push the accel or coast button nothing happens, what could it be?
Be the first to like this post.
Back to top
