Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: engine not starting....ugh

+ Reply To Thread
Posts: 11-14 of 14
2011-08-11 03:59:17
#11
No using the 93 ecu now...but when I had to fix the 91 harness I took it to a friends car and it fired right up..the wires were all the same...its the small square plug that the engine plugs into the dash harness
2011-08-11 04:36:31
#12
So you're sure of spark, and fuel. Well are the plug wires perhaps in the wrong order? There should be numbers 1-4 on the cap, and #1 starts at the front of the engine, or pass side.
2011-08-11 04:44:52
#13
Also, I was trying to find some issues with my NX. I was under the hood and had the intake off for something, and I also swapped in another fuel pump. I put my intake back on, then tried to fire it up, and nada. Swapped back in my original fuel pump, as I thought the newer one was bad, and still nada. It turned out that my dumb ass forgot to tighten the hose clamp on the throttle body, so it was a major vacuum leak at that point. So, check that, and other vac leaks as well.
2011-08-11 10:25:48
#14
Ok ill look.tyvm
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top