Thread: help with power windows on my b13 se-r

hey guys i was wondering if anyone can move me towards the right direction on putting power windows on my b13. i want to look has clean has possible, i wanna use the 4 door power window switch for sure, but i wanted to know... will the 4 door panel fit? and can i use power window moter off the 4 door? sorry for the stupid question, i jus cant find any info at all

I asked a somewhat similar question a while ago, hopefully it helps?
http://www.sr20-forum.com/general-sr20/34538-b13-door.html

thanks for tryin man but nah it didnt really help but thanks man

I have an aftermarket kit that will work .If you are interested,pm me.

To do it correctly, "Clean", you will have to swap the whole window track assembly. Not a quick task but not too complicated either. Is your car 2 door? Why need the 4 door window switch? The car should have the wiring to the kick panel but may not have it in the door.

Honestly, ive installed a few aftermarket window kits and if done right work really well but where the crank is not they put a cap that sticks out slightly. Not the most appealing but far easier than basically swapping the guts of the door.

Not sure if the motors are the same, i would think the motors are the same but obviously not the tracks.

mines a 2 door but i wanna use the 4 door switch cause i want mine to look like it came wit power windows, i dont really like the universal kits cause iv had a few friends put these on there cars and there really slow and choppy and yea they stick out too much. so it is possible to swap the tracks???

thanks man

he is asking why you want the 4 door switch because you only have 2 doors..you would have 2 switches that would be unneeded..


did any 2 door b13's come with power windows?

I'd be surprised if none did. The SE-R was swanked out with the sunroof and 2 doors, and considering the sunroof was powered I'm sure the windows were on some. And if you're going for clean, you want the 2 window switch. A 4 window switch on a 2 door car just screams 'thrown together'.

nope no 2 door sentras had power windows AT ALL i even checked the nissan tsuru and still nothing so i have no choice but the 4 door switch switch too me is fine cause ill really be the only one seeing it but how would u guys do it

What bright engineer thought that was a good idea.

Honestly, I'd try to put the 2 window switch from a B14 SE-R in the B13 door panel, using a bracket and dremel. I'd think that would have the best look and function, and still be Nissan. That is alot of work though, with relatively high risk. I'm OK with risk, you may not be as welcoming of it.