Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: What sensor is hooked up with the MAF?

+ Reply To Thread
Posts: 1-8 of 8
2011-07-11 10:00:49
#1
What sensor is hooked up with the MAF?
There is 2 wires that come out of the wire that plugs into the MAF and it goes down just hanging there... It's plugged into what looks similar to a MAF sensor???? It appears to have 2 screw wholes for something?

95 200sx
2011-07-11 10:36:56
#2
sounds like you're talking about the air intake temperature sensor
2011-07-11 19:27:54
#3
Yeah now that I look it up, it is that part. Is it supposed to be just hanging down?
2011-07-11 19:29:34
#4
Hanging down where? Just in the engine bay? It should be part of the intake of fresh air.
2011-07-11 19:29:52
#5
usually it bolts to an opening on the air silencer box. if you don't have that, though, it's really got nowhere to go. I usually just unplug it and remove it entirely if I've got nowhere for it to go. It's a diagnostic sensor only, it doesn't affect the engine operation or performance.
2011-07-11 21:45:52
#6
Oh okay.. I'll just leave it there. It's zip tied to a wire so its not like its flying everywhere... Thanks guys!
2011-07-11 23:21:57
#7
Just leave it in zip tied somewhere near the filter. That was what they told me when I called JWT the first time I got a pop charger that had no provision for it.
2011-07-12 00:45:51
#8
Originally Posted by Benito
Just leave it in zip tied somewhere near the filter. That was what they told me when I called JWT the first time I got a pop charger that had no provision for it.


It is not for the pop charger, it is for the intake piping. But it can also just be zip tied and allowed to read air in the engine bay. Another worthless sensor of Nissan future proofing cars!
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top