Welcome to the SR20 Community Forum - The Dash.
SR20 forum logo

Thread: A/C discharge hose repair help

+ Reply To Thread
Posts: 1-6 of 6
2011-07-09 17:18:25
A/C discharge hose repair help
Took out the broken hose and it looks like a clean break. When I put the two parts together it looks like there's no gaps in between. Would I be able to fix this, and if so how ? Would JB Weld work ?

Last edited by 24KB on 2011-07-09 at 19-59-36.
2011-07-10 05:52:51
idk man..I think Vadim did something w/JB weld or something on his stock B14 cable to get it to fit w/his turbo by essentially cutting it off and repositioning it.

I'd just go get one from a junkyard. You should be able to find them all over. A GA16 one should work, but will be routed a little differently.

Is this the one that goes into the condenser?

2011-07-13 13:16:40
In the last 2 years I've had 3 of those hoses break on me, it's from the vibration & movement of the motor, I've used the ga16 and the sr20 ones from junkyard, the ga16 has lasted the longest for me
2011-07-13 14:14:34
Lol that broke on me after my ve swap. Still need to go get another one, as most of you guy know black b14's in the hot sun do not cool to well.
2011-07-13 18:46:10
JB won't hold over time.. (been there done that)

2011-07-13 20:54:21
I would just get another hose. What year is your car? If it's a 95-97 I have a hose for sell.

The hoses are different between 95-97 & 98-99. Also, if you are missing the clip/clamp for the hose you will want to get another one or you will be replacing the hose again very soon.

Here is a link to some good info concerning the B14 high pressure hoses....http://www.sr20-forum.com/433896-post52.html
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)

    Back to top