Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Wheel hub bore

+ Reply To Thread
Posts: 1-10 of 10
2011-06-26 17:15:21
#1
Wheel hub bore
I'm considering the Rota RB, but the hub bore on the size and offset I want isn't compatible with the B13 diameter. Should I go lower and have the wheel machined or higher and use a sleeve or something? Thanks
2011-06-26 17:48:38
#2
Best bet is to go higher and get centric rings it will be cheaper . IIRC the bore is 69mm or 72mm ? someone correct me on this ?
2011-06-26 18:06:00
#3
69.1mm i believe.

any good shop should be able to machine them to fit perfectly. at least ones i did fit perfect after

edit: typed the wrong number. meant 59.1mm bore
Last edited by MN_SR20 on 2011-06-26 at 22-18-40.
2011-06-26 19:53:42
#4
Why do I have 59.0mm as the hub bore in my memory?
(The wheel itself or the adapter would be machined to 59.1mm to clear.)

If the wheel hub bore size is within a couple millimeters of the correct size then have the wheel machined. Otherwise go larger and go with an adapter.
2011-06-26 20:29:30
#5
my b13 is 59.1 ^ like he said
2011-06-26 21:41:22
#6
Ben, we had a deep discussion about this once before. It's definitely 59.0mm.
2011-06-27 01:11:30
#7
I've had to use 59.2 hub centric rings to clear the hubs.
2011-06-27 04:19:39
#8
Yeah, I had read 59mm. Thanks for all the responses!
2011-09-23 22:30:48
#9
please delete thread
2011-09-24 00:21:51
#10
No need to delete it?
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top