There are several connectors on the harness that are like that with the metal clasp. One is for the egr solenoid, one red connector for the coolant temp sensor, one black one for the Auxilary Air Valve under the intake manifold. Looks like a black and silver square bolted to the bottom of the plenum. Then another black one for the knock sensor but its all by itself on a long wire. Cant really miss it.
The idle air control valve has two connectors, one that looks like that grey snap together connector in your picture and then a brown two wire connector. Cant miss those either, Those all come off the same section of harness as your coolant temp sensor wires. Other than that you should be covered.
The idle air control valve has two connectors, one that looks like that grey snap together connector in your picture and then a brown two wire connector. Cant miss those either, Those all come off the same section of harness as your coolant temp sensor wires. Other than that you should be covered.
Be the first to like this post.
Back to top
