Thread: AD22VF pads & rotors.

Ok so i got these pads & rotors from Autopartsfair.com ( free shipping for orders over 50 bux :bigthumbup Brembo blanks & EBC ultimax pads.

Got 'em for a 93 NX2000, japan,w/ABS, rotors 257X26MM....


My question is this , is the pad supposed to be smaller than the rotor surface? I have some AD22VF calipers i bought off a forum member and i haven't installed yet.

I'l try and take a pic in a minute.

This is what i'm talking about/\

Looks good to me Manny... even tho they aren't going to sit like that at all.. They are actually about 1/4" from the outer edge and almost 1/2 from the inner area.

But you will find out when you get them on I guess.

Cool, thanx Wayne, can't wait to get 'em on .....I just found it strange that the pad wouldn't fit the whole rotor.....

Those might just be SE-R pads, they should cover more area than that.

I'm with Serban. They look too small. Test them on the caliper.

I'll get you a picture of the right nx rotor/pad combo after 6.

Might be right... but he also has the pad on the very edge of that rotor.. And I know that the AD22's don't sit right on the edge.

That's what i thought. They must have sent me the wrong pads.

But i did order them for a 93 NX2000 with ABS. See the 1st ad in the link and it's the same part # ( E35UD549 ) as what arrived...


http://www2.partstrain.com/store/index.php?D=nissan+nx+1993+&Ntt=nissan+nx+1993+&Dx=mode+matchallpartial&Ntk=Main&Ntx=mode+matchallpartial&N=4294967258&Nty=1

Ok , i put the pads in the calipers, and the calipers on the rotor to see the fit...