Originally Posted by kevo Maybe the lower numbers of the board, I'm getting 17mpg in my VE'd 200SX city mileage and A/C most of the time
The most I got was 23mpg no A/C at all
i would get a wide band and check ur fuel ratio. that seems to low unless u get on it all the time.
0 Likes
Be the first to like this post.
'94 Suzuki Swift GT A.K.A The Little Engine That Can - 40 MPG Never Felt So Good
'96 200 SX SE-R VZR N1 Version 1 - Neo AFC, Calum Basic, 9lbs flywheel, stillen cam gears, ssac header, 3" exhaust, Innovate wide band, Tein Flex, G spec pulleys & Apex N1
Them -Is that a 2.0. ME - Naw its a 1.6 Them -
PS3 Tag :Miami4ThatAss/BURN1SLOW
Ill Always Be A Miami Boy!!!
God Bless SEAL TEAM 6
I just took the SE-L on a lengthy trip (70-75mph). Trip odometer reads 324 miles. Gas gauges reads 3/4. So that puts it around low to mid 30's. It's the first time I actually checked it. I'm pretty happy with the mileage.
Sweet that should work. Make sure to ground it in a good location, like the ECU ground ontop of the intake manifold. My UEGO was inaccurate until I grounded it where the ECU is at.
Originally Posted by hammerin I just took the SE-L on a lengthy trip (70-75mph). Trip odometer reads 324 miles. Gas gauges reads 3/4. So that puts it around low to mid 30's. It's the first time I actually checked it. I'm pretty happy with the mileage.
I wouldn't be too happy with the results yet. That's a very inaccurate way of checking MPG's. I've filled up 3-4 gallons at 3/4 mark .
Also my SE-L got 33 mpg NA, but those where the pre-ethanol days.
Originally Posted by Vadim Sweet that should work. Make sure to ground it in a good location, like the ECU ground ontop of the intake manifold. My UEGO was inaccurate until I grounded it where the ECU is at.
I already did that in my classic when installed the UEGO, ran a cable straight from the manifold and also a positive cable from the fuel pump relay, worked like a charm
My car needs a tune ASAP, no hesitation or so but I know is not runing well
0 Likes
Be the first to like this post.
Yamaha Banshee bolted on
B13 SE-R Classic T25
B14 SE-R SR20VE bolted on B15 SE-R Spec V i/h/e/bsr/es mmi's/es bk/ss/ltb/coiloversSOLD..!
Originally Posted by Vex630 Wasn't that the sludge monster?
You bet
Originally Posted by kevo I already did that in my classic when installed the UEGO, ran a cable straight from the manifold and also a positive cable from the fuel pump relay, worked like a charm
My car needs a tune ASAP, no hesitation or so but I know is not runing well
Fuel pump is 15A right? Did you run a 5amp inline?