Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Anybody ever roller paint their car?

+ Reply To Thread
Posts: 21-30 of 47
2011-05-02 20:13:10
#21
my G20 is painted with a roller almost every week!

2011-05-02 21:28:08
#22
^^^haha YES!!!
2011-05-02 21:53:55
#23
Not rolled on but it is rustoleum with a clearcoat on it.





And what it looks like now after it's all dusty from sitting in the garage.

2011-05-02 22:13:17
#24
Originally Posted by seafunk
t

yeah you need a compressor i just went to harbor freight and bought a compressor cause i needed one anyways for other stuff, just make sure you use oil/water filter on your compressor cause rusto is oil based paint and if you get any moisture in the lines it will mess up the finish on the paint, you also have to thin the paint out with mineral spirits about 90% paint 10% ratio. It only took 1 quart of paint to paint the civic hatch i had which costs like 7bux at walmart


90/10???? Everywhere on the web it says 40-30% paint, not 10.. I did mine with 40% paint
2011-05-02 23:28:14
#25
I would just buy a cheap HVLP gun for $30 and either borrow a compressor or buy one. You will use both again at some point. You can use any paint you wish, just thin it out. I bet a quart would be enough.
2011-05-03 00:16:53
#26
Originally Posted by nsusammyeb
Not rolled on but it is rustoleum with a clearcoat on it.



How did you paint yours?
2011-05-03 02:19:59
#27
used a cheapo siphon gun, and thinned the paint down with mineral spirits. It's not rocketscience you just thin it down enough so that the gun sprays well, without splattering. You'll get a feel for it.
2011-05-03 02:56:50
#28
go on hondatech.... they do it like crazy!
2011-05-03 05:59:57
#29
yeah hondatech lol, but yeah 90/10 honestly if your spraying it you want to thin it just enough to spray through the gun easy, if you find that thread on honda tech and look at the end most of the guys getting good results aren't thinning it very much and getting pretty good results with like 4 coats
2011-05-03 06:28:16
#30
Originally Posted by seafunk
yeah hondatech lol, but yeah 90/10 honestly if your spraying it you want to thin it just enough to spray through the gun easy, if you find that thread on honda tech and look at the end most of the guys getting good results aren't thinning it very much and getting pretty good results with like 4 coats


Yeah I put 3-4 coats, somewhere around there and it was good enough heh
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top