Thread: Z32 calipers on a B15???

Sup guys, i bought some Z32 calipers from a friend the other day, i know they bolt right up to the car but i was wondering if anyone has done this already??? if so anyone got an idea on what brake lines should i use??? any info is very helpful, thanks alot guys...

Either stock or stainless... what other lines would you need?

thanks, cuz i wasnt sure if the stock lines on the b15 would work, someone had mentioned to me that the b15 lines werent good enough so i did some searching and i ordered some stop tech stainless lines...and i hope to have these calipers on by nextweek.

Which rotors you use?

im gonna use the stock ones for now, but when i get some more money im gonna buy some power slot slotted rotors cryo treatred...the only other mods that ive have done to the calipers to fit is i had to dremel out a small piece on the caliper so the rotor clears.

There are plenty of us had done this before....
and I was the first 1.8 b15 who had brembo on 1.8...
what i am trying to tell you is, Yes they all will fit.
For your stock rotors in order to fit on your z32, I remember you need to shave it down the rotors a little bit.
Check out B15u.com
There are plently useful info for you :d and hope these can help you out.

thanks, you had to change the brake line on the 1.8 for the calipers to work right??? yea ill look on b15u, well i ordered the hardware kit and the stainless steel lines already so hopefully by next weekend ill put them on...

Stock lines? I don't think so. If the stock lines are anything like every other B13/14 P10/11, you'll need some conversion lines to do it right. Something along these lines: Circuit Sports Z32 Front Conversion Brake Lines - S13/S14 [ N3-300ZXSM ] - Enjuku Racing - Performance Parts and High Quality Fabrication

The Z32's use a different fitting.

All B15 Models 300ZX Calipers on a B15 - B15U.com - Nissan Sentra Forum

shave down inside the caliper a touch with a dremel and you can fit standard 11'' rotors. no need to shave rotors every time.

thanks, i was looking for this thread.