TPS and Pigtail wiring...
91 Sentra, JDM motor. I've searched but couldnt locate an answer.
I don't have the connector to the TPS, so I used a spade female adapter to clip the wires into the sensor. The wires I have are black, red and white. Now, on se-r.net, it is showing that the wires should be connected as A-Negative, B-Positive and C-Signal. If I put these wires like so, my will not start. The way that I remember having them before I removed the TPS is A, C and B. What I need to know is those with a 91, how are the wires you have and how are they connected?
TIA
I don't have the connector to the TPS, so I used a spade female adapter to clip the wires into the sensor. The wires I have are black, red and white. Now, on se-r.net, it is showing that the wires should be connected as A-Negative, B-Positive and C-Signal. If I put these wires like so, my will not start. The way that I remember having them before I removed the TPS is A, C and B. What I need to know is those with a 91, how are the wires you have and how are they connected?
TIA
Be the first to like this post.
Back to top
