Thread: g20 ecu in a auto b14?

Can I use a g20 ecu on a automatic trans b14? I'm looking for a bit higher redline. Should I get a manual or auto ecu?

Lou, if you are looking for an obd2 g20 auto ecu, I have one.

whats the redline on it?

Not sure. I was running it in my previous owned 98 Sentra with VE.

so you don't remember what it was revving up to?

Didn't have the ecu for long in the 98, never had the chance to rev it either. Sorry if this doesn't help at all.

nah its cool, When I find out about the redline thing with an auto I will see about purchasing your ecu.

Lou auto and 5speed G20 ECUs give the 5speeds a high rev. so in theory im guessing it would do the same for the auto. i dont think a 5speed ecu will work in a auto car.

I have an auto OBD-II G20 ECU that I am looking to get rid of. The rev limit is at 7500 RPM.

Someone on the old forum lied about it and said it was a manual, but it is for an auto. I ran this for years and years with no problems. It ran better than the stock ECU and it was a stock ECU (if that makes sense to you guys)







Never even put into diagnostic mode!

I have had one for sale for a while now ....7500 rev limit


http://www.sr20-forum.com/naturally-aspirated/39078-fs-96-g20-ecu-auto.html