" /> " /> my car vibrates alot.
Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: my car vibrates alot.

+ Reply To Thread
Posts: 11-20 of 25
2010-12-25 23:35:42
#11
Personally.... I would check over things before spending money on OEM axles. But that's just me.
2010-12-25 23:38:25
#12
i mean oem rebuilds from schucks o'rileys .. the axle HAS to have the little rubber balance thing or it will cause his exact problems, i've told people time an time again, an when they finally listen to me poof! problem solved lol..

but ya check the bearings.. an maybe get that rear poly mount put in.. but seriously its the axles...
2010-12-26 00:59:31
#13
Well my pass axle has the bushing but the driver side don't, and the pass side im gettin most vibration from there.
2010-12-26 00:59:35
#14
Originally Posted by shuttersboy
but dont wheel bearings make like a wo wo wo noise when its bad?


yeah like this:
2010-12-26 01:36:23
#15
^LOL.

Its your axles more than likely. My car started doin that then all of a sudden it got so bad on the highway it would bind up and jerk the car into the next lane
2010-12-26 02:11:08
#16
tires?
2010-12-26 02:37:36
#17
not axles. axles would vibrate even when off throttle.
2010-12-26 03:15:05
#18
Originally Posted by nacho-nismo
not axles. axles would vibrate even when off throttle.


That's the thing about the axles is sometimes they do both sometimes only on accel.. Either way I'm willing to bet its the axle..
2010-12-26 04:18:18
#19
Originally Posted by lynchfourtwenty
i mean oem rebuilds from schucks o'rileys .. the axle HAS to have the little rubber balance thing or it will cause his exact problems, i've told people time an time again, an when they finally listen to me poof! problem solved lol..


The axle does not need the rubber balancer I have run my set of Autopart International axles for 4 years, no balancer and no issues and this is both sides. I installed a drivers side axle of the same brand in SuperblackZ's SCC car and he has not had an issue.

Keep in mind my car gets used hard and driven every single day including in the winter. Hell I have launched at 5,500 using 2 step and never had an issue.
2010-12-26 05:33:36
#20
Originally Posted by Jimithin7000
The axle does not need the rubber balancer I have run my set of Autopart International axles for 4 years, no balancer and no issues and this is both sides. I installed a drivers side axle of the same brand in SuperblackZ's SCC car and he has not had an issue.

Keep in mind my car gets used hard and driven every single day including in the winter. Hell I have launched at 5,500 using 2 step and never had an issue.


lucky ducks!

i've seen this problem time an time again, its always the axle.. but hey maybe im wrong this time.. i have personally had problems on 2 different cars because of cheapy axles.. they also don't like to come out of the transmission sometimes an that sucks big time..
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top