Thread: Cheap shifter stabilizer mount

Part needed: Energy Suspension 9.5101 (available in red and black)

This comes in a set of 2, as they are 7/16" sway bar bushings, but it just happens to work quite well in this situation.




Holes are dead on, you can see the stock bracket underneath.



The ONLY thing you need to do to this bushing is cut off a lip on one side of the urethane. It is thicker than the stock one, and that bolt will not go all the way through far enough to get the nut on the other end.

Here are the installed pics:

Here's the installed pics.


You can see the lip I cut off on one side of the bushing





NOTE: Some people who installed this did not cut the lip off one side, they just bought a longer bolt.

just like your sub note you added. mine is coming (via keo) shortly and i plan on buying a longer bolt and 2 washers/nut to use. seems easier to me and better.


i would also suggest using larger washers on the mounting studs.

were doing this hopefully this weekend

i think its going to take a good while for them to come in.

nice write up

I've had mine on since the summer and I like it a lot.

let us know what size bolt you are gonna use, i got my bushing already, just havent installed it yet.

Just letting everyone know, I have these available now. 5 sets of red and 5 black.


Bushings:$18.95 + shipping

I canceled the Jeg's order and Order 3 black sets from Serb.

Serb please get it out ASAP the MD guys will love you more!!

Damn so Serb is down to one set then?

We need to add this to the commonly used parts thread...