Cheap shifter stabilizer mount
Part needed: Energy Suspension 9.5101 (available in red and black)
This comes in a set of 2, as they are 7/16" sway bar bushings, but it just happens to work quite well in this situation.
Holes are dead on, you can see the stock bracket underneath.
The ONLY thing you need to do to this bushing is cut off a lip on one side of the urethane. It is thicker than the stock one, and that bolt will not go all the way through far enough to get the nut on the other end.
Here are the installed pics:
Here's the installed pics.
You can see the lip I cut off on one side of the bushing
NOTE: Some people who installed this did not cut the lip off one side, they just bought a longer bolt.
This comes in a set of 2, as they are 7/16" sway bar bushings, but it just happens to work quite well in this situation.
Holes are dead on, you can see the stock bracket underneath.
The ONLY thing you need to do to this bushing is cut off a lip on one side of the urethane. It is thicker than the stock one, and that bolt will not go all the way through far enough to get the nut on the other end.
Here are the installed pics:
Here's the installed pics.
You can see the lip I cut off on one side of the bushing
NOTE: Some people who installed this did not cut the lip off one side, they just bought a longer bolt.