Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Well there goes that....CARNAGE!

+ Reply To Thread
Posts: 11-20 of 32
2010-11-27 06:19:18
#11
^me? still waiting for parts
2010-11-27 08:07:22
#12
Originally Posted by Mike22487
^me? still waiting for parts

Make sure you check the oil ports on the rods and the crank. In those 4 miles it had managed to completely destroy the oil port on rod 2. Also, what looks like the reason for the bearing failure? Mine was due to oil starvation - I took no chances, and put in a new oil pump. I'd hate for you to swap out the bearings and then find out after you get it running that there was more damage than you thought.

Which bearings you putting in? I went with a full set (main, rod, and thrust) of Clevite's.
2010-11-27 12:06:27
#13
Originally Posted by SE-R2FAST
what rmp were you revving the engine in the video?


About 2.5-3K. It's sounds worse with the chain rattle and all. It's really not that bad.

I'm going to drop in 10W50 today and a quart of Lucas and see what it does. I mean I still need a car until I get the VE Miko.
2010-11-27 12:28:20
#14
Originally Posted by Wayne
About 2.5-3K. It's sounds worse with the chain rattle and all. It's really not that bad.

I'm going to drop in 10W50 today and a quart of Lucas and see what it does. I mean I still need a car until I get the VE Miko.


Good luck with that. Just don't rev too high! :P That sucks
2010-11-27 14:53:03
#15
That sucks Wayne, when it comes time if u need help and I'm free I'm down to help.
2010-11-27 15:01:14
#16
Originally Posted by Shawn
That sucks.

On the other hand, every breakdown is an opportunity to upgrade.

I know I'd be saying to Wifey "Honey it really sucks, but I think I need a new motor...." Which would of course be a VE.


so your saying that my slipping clutch is an opportunity to upgrade to a six speed setup?
2010-11-27 15:56:54
#17
Originally Posted by 92SentraSE-R
Good luck with that. Just don't rev too high! :P That sucks


Well I have been only as high as 3.5K since the time I found out. And seeing that my ride to work is mostly highway 4K @ 70MPH is fine I hope.

Originally Posted by NissanGuy
That sucks Wayne, when it comes time if u need help and I'm free I'm down to help.


Tell me about it J. And this was going on the whole way to the last meet and before then. Just thought something was loose.

And I'm having Danny's car buddy/mechanic do the swap for me this time. I'm kinda over car work for now.
2010-11-27 22:51:33
#18
And then there was this......

2010-11-27 22:52:48
#19
ouch
2010-11-27 22:55:13
#20
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top