Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: 215/45/16 on a 16x7 42mm Offset And Wich Wheel

+ Reply To Thread
Posts: 1-5 of 5
2008-02-18 22:27:34
#1
215/45/16 on a 16x7 42mm Offset And Wich Wheel
Ok guys the ride is getting painted soon. Its a 91 B13 Sentra. And I decided that if I'm gonna have new paint that it would only be rite to have a new set of shoes to match. So I'm going back to a 16x7 wheel. Fitting them with a set of Azenis RT615's. There are two 16in. tire sizes that Falken offers. Do you think I can get away with the 215/45/16's with my Eibach Pro Kit drop? And second which wheel should I go with. I have these two in mind.

MOMO Corse RPM has 38mm offset


Or Tenzo R DC-6 has 42mm offset


Opinons are greatly appreciated. Thanks guys
2008-02-19 00:28:53
#2
I think the momo is going to look better but they are both nice
2008-02-19 02:56:28
#3
momo
2008-02-19 04:05:58
#4
the 215/45/16 is definitely going to rub. i have the 215/40-16 and they rub either the shock without a spacer or rub the finder with a 4 or 5mm spacer. i ground a little of the spring perch down but i plan on rolling the fenders this spring. i have the road magnet springs btw
2008-02-19 04:11:25
#5
Edit: beat me 2 it^^^

I ran a 16x7 +40 on 205/45/16's and barely cleared the rear shock body on the NX. 215/45/16's +42 I believe will require a spacer...Good luck

btw, Tenzo's look way better than those busy looking MOMO"S
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top