Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Anyone Here Use These Rods

+ Reply To Thread
Posts: 1-10 of 16
2010-07-20 04:08:30
#1
Anyone Here Use These Rods
I know of the company skat, but anyone tried these rods. I am going to call and see what the weight is on these. Price is good.


Nissan Sentra Silva SR20DET 900 HP Connecting Rods: eBay Motors (item 270608266504 end time Aug-14-10 14:19:33 PDT)


These rods are 514 grams and are $286 shipped. I have no idea who makes them, and would like to know if someone tried them. The price looks good.

240SX S13 S14 S15 SR20DET H Beam Rod Rods SR20 + Bolts: eBay Motors (item 170508287205 end time Aug-01-10 17:55:29 PDT)
2010-07-20 04:14:25
#2
Ive also wondered that too for a long time. Ive heard of SCAT brand in the V8 community, but idk if there rods are any good. They look almost the same as Eagles, so id imagine theyre on par with those, but Ive never personally used them, so im in the same boat as you.
2010-07-20 06:54:16
#3
Only time i have heard about scat is when it came to beetles.
2010-07-20 07:05:08
#4
dung beetles?
2010-07-20 10:10:18
#5
Alot of my friends use skat rods in there mustangs we ran a whole season with a car that made 980hp and never had a problem . With me seeing that i would have to say that for that price they have to be an ok product .
2010-07-20 12:23:05
#6
Dsm guys have been using them for years, I've seen a couple make around 600hp. I've heard the same company makes them for eagle and scat, then each company does there own machining.
2010-07-20 12:43:31
#7
Check this rod out from Scat for the SR20DE, scrol down the page and you will see the SR20DE ultralite rod. I have no idea how much the weight is but. If the standard Scat rod is about 514 Grams then the Ultralit must be in the 480 Gram region

SCAT H-BEAM CONNECTING RODS NISSAN SR20 SENTRA SR20DET: eBay Motors (item 170428075291 end time Aug-02-10 13:36:59 PDT)
2010-07-20 12:50:00
#8
Originally Posted by Ken's
Dsm guys have been using them for years, I've seen a couple make around 600hp. I've heard the same company makes them for eagle and scat, then each company does there own machining.


I know of Scat but I dont know of any SR20 guys using their rods./
2010-07-20 15:44:55
#9
I'm using SCAT rods in my VE, they were recommended to be by Bigtoe. His 'track' motor using them and has never skipped a beat. Here's his complete setup:

SR20 Forum - View Single Post - Dry Sumped Turbo
2010-07-20 20:25:28
#10
Dre there is a 240 up here by me who is using them. That's what I was told by the owner. The car is not a high whp but, it runs well.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top