Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Anyone have code P0705?

+ Reply To Thread
Posts: 1-10 of 11
2010-05-30 02:22:25
#1
Anyone have code P0705?
I just need to know if this code throws the CEL on. I currently have a CEL on for my msd and I am hoping I can get that taken off and pass the test.

The knock sensor code doesn't throw the CEL. I swear if they fail the car based on stored codes that don't throw a CEL on, I will be mad.
2010-05-30 03:07:16
#2
IACV iirc. Will fail for that code.
2010-05-30 04:46:00
#3
it is the neutral switch code. The one on the trans, not the clutch pedal.
2010-05-30 06:57:51
#4
I have that code.

It's for the neutral switch sensor on a manual transmission. I'm not sure if you will fail, technically it's a freeze frame or pending code.
2010-05-30 13:18:00
#5
I have that code too. I thought it was because I have an auto ecu with a manual tranny.
2010-05-30 16:39:23
#6
Hooked My Car Up To An OBDII Scanner - SR20 Forum

i had the same problem
2010-05-30 17:09:50
#7
Does anyone actually have a CEL on because of this code? It is the sensor on the bottom of the trans by the differential. If it isn't plugged in it will throw this code.
2010-05-30 17:55:21
#8
My bad! Could have sworn it was iacv =\
2010-05-30 18:08:48
#9
I don't have a CEL for this. the knock sensor was not throwing a code either.

NissanGuy: there was no conclusion on that thread.. did you end up fixing the problem, and if so, what was the fix?
2010-05-30 18:14:58
#10
Pretty sure you can just plug in all the sensors on the trans. But my knock sensor on the other hand has always thrown a ghost code since I did the 97 JWT computer.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top