Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Clutches and Your set up

+ Reply To Thread
Posts: 11-20 of 26
2010-05-25 17:50:12
#11
Guys don't forget to mention ur basic set up
2010-05-25 17:57:52
#12
on my old de-t s4's external gate gt28rs 342whp 310lbft ran a act xtss setup.

my old ve setup N1's,fuji, calum(with custom program) jwt pp with se 2000 disc. est whp 190-200whp.

my new setup ve-t n1's aem gt3071r water/meth asp el manifold. shooting for high 400's low 500's act xt pp with sprung six puck.

I have a fidanza flywheel on both cars.
2010-05-25 19:29:22
#13
SR20DE with header, cat-back, 91 intake cam, s-AFC II dyno tuned with g20 ECU, prothane mounts, blah blah blah.

I use a b15 clutch and pressure plate and when the clutch was brand new, I was able to chirp third when I tried to chirp. It has lasted me the past 80k miles and I suspect it will last another 80k as long as I do not get an SR20VE...
2010-05-25 22:05:53
#14
im running an act street/strip with hd pressure plate..

bluebird engine with a gt28rs(gt2871 compressor housing). has been holding good even at 15psi..
2010-05-25 22:36:22
#15
act hd pressure plate with exedy street disk holding 300tq. Setups in signature.
2010-05-26 00:09:40
#16
i have sr20ve-t i am running clutchmasters f400 6 puck and machined flywheel to 18 lbs i think it was
2010-05-26 00:23:37
#17
i cut a circle out of a pizza box for a clutch disk and i added some paper clips an rubberbands to a stock pressure plate.. should hold upto 1.21 jiggawatts @ 88 mph
2010-05-26 00:31:00
#18
Originally Posted by lynchfourtwenty
i cut a circle out of a pizza box for a clutch disk and i added some paper clips an rubberbands to a stock pressure plate.. should hold upto 1.21 jiggawatts @ 88 mph


Personal or Large? Dominoes or Pizza Hut?

What brand paper clips? the cheap office depot kind or staples? hmm...
2010-05-26 00:38:11
#19
well if you are in for some serious sh1t i reccomend the pizza hut box, but the dominos engauges softer.. i used a medium.. And only use paper clips an rubberbands from Staples.. that office depot crap is like autozone!
2010-05-26 03:07:43
#20
You know what I run.
Exedy Stage 1
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top