Thread: Quick 01 SR20 RR engine Quesion..

can't - never took photos and the engine is long gone now.

btw this only has to be 1/4" steel.

ok im just gonna go with the lowport intake.. but on my old engine i have the highport with my 370 side feed injectors does the lowport also take sidefeed or im gonna have to get different injectors?

i did some searching and it looks like the injectors will work.. what about the throttle body from the highport to the lowport will that work? and the last question is wireing the idle control valve on the highport a cakewalk like the ve motor?

Yeah it will take the side feed injectors, make sure its the red ones, You can tune it a little if you get a AFPR.

Here's a pic of my old RR motor with low port intake manifold.




You will also need to put a lowport valve cover.

I recomend the Low- port throttle body it's bigger and better.

alright sounds good and your engine looks awesome.. well im boosted my ecu is tuned for the 370's i wanna run this RR on boost..so im guessing my tps bolts on to the highport TB right..

oh and why the lowport valve cover i like the rr one..

Because of the hose that runs from the valve cover to the intake manifold.

You can run a custom one