Thread: b15 muffler fit on a b13?

I tried to search this to see if the axle back off a b15 could bolt right in place on a b13.... the mounts look to be in the same spot.

i am asking this because i found a good deal on a super rare muffler that was made for the spec v.

what brand is this super rare muffler? and no i dont believe its a bolt on..

tomaz is sort of correct. The manifold will bolt on (but why would you want it to, it has a cat in it and is longer than the b13 is, the secondary will definatly not fit due to the b15 secondary having a bend in it, and the b15 has a second o2 sensor that you wouldnt use and would look dumb.

eh, ill just get it anyways and have an exhaust shop make it fit, thanks for the input tho.

lol dont want to say what muffer it is?

Then why waste my f'n time with your question if you're just going to do it anyways. SO sick of this crap going on.

I guess this is for anyone who SEARCHES for the answer even though I've answered this particular question before, but instead of being a jerk and telling you to look for it I helped you out only to answer with 'I'll do it anyways'. Bravo.

super rare ga16 JDM dorifto yo!!!!

im really curious myself. just because i have a b15. there are countless catbacks still around, so please define 'rare.' all of the following are still avalible but just in limited numbers or no longer produced : nismo, borla, thermal research, mossy performance, hks sport, vibrant, skunk 2

stromoung
tanabe
hks sport
hks titanium
thermal research
greddy spectrum
greddy evo2
apexi n1
apexi ws2
vibrant
magnaflow
nismo
borla
stillen
mossy perfromance (greg v)
vrs
skunk 2

Dude you wasted your own time with your response, he is asking about an axleback(ie. muffler), not an exhaust mani/header.

Anyway, to answer your question. I have checked my buddy's stock specv muffler under my b14 and it would not bolt to my stock exhaust at the time obviously. Also, it was so big that it would have to be hanging pretty low, or it would be banging around under there. You can make it work though, there is a b13 on this forum that has a maxima muffler on it(same as specv).

Thanks man, i mean the bends on the axle back look really close to the bend on the b13 stock muffler. i am just curious if the hangers are the only thing that'll need modification. and you can get any muffler to work on any car. i was just curious if it was a straight bolt on, but apparently not. And yes i obviously knew an entire b15 exhaust would not work since i used to own a b15 spec v at one point in time.


Oh and i was looking at the Greddy DT muffler, just because of how goofy it looks.