Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: 95 g20 tranny into 94 b13?

+ Reply To Thread
Posts: 1-10 of 13
2010-03-11 04:38:48
#1
95 g20 tranny into 94 b13?
sup, my tranny has nothing wrong with it but i went to my local junkyard for the heck of it and i found a 95 g20 tranny and i wanted to know if that would bolt in and if it has a lsd? how can i tell if it is an LSD tranny. i need to kno if its worth it with a 90 day warranty. help me out
2010-03-11 04:48:10
#2
94-96 G20T's had LSD. It will fit into a B13 SE-R just fine.
2010-03-11 04:55:22
#3
yeah just look for the hump on the driver side where the axle goes in. If you see a very large axle seal its LSD, if its a small seal like the passenger side its a non.
2010-03-11 05:26:16
#4
You could still use it without the LSD. You'll just need to get a non lsd drivers axle. B14 Non LSd drivers axle will work for you.
2010-03-11 05:38:22
#5
Well i can get this Tranny for 350 is it worth if its an LSD
2010-03-11 19:10:36
#6
this is an 1995 G20 Transmission. Is it a LSD one???





2010-03-11 19:11:59
#7
No.

That's non-LSD.

No bulge.
2010-03-11 19:12:12
#8
no that is a non lsd unit
2010-03-11 19:19:30
#9
So the P10 have the same bulge as the P10??
2010-03-11 19:21:41
#10
Originally Posted by xAxel
So the P10 have the same bulge as the P10??


all lsd trannies b13,b14,b15,p10,p11 have the hump on the drivers side axel input.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top